Azpects EASYTileAlign Levelling Caps

The Levelling Caps have been designed to work as part of the EASYTileAlign system. These work by screwing onto the Spacer Posts once they have been attached to your tile edges. You screw the Levelling Cap down until it cannot go any further; this means it has reached the top of the two tiles, and has levelled the tiles out so they are both level to each other. 

These come as a pack of 50 and can be used time and time again. Click here to buy. 

Azpects EASYTileAlign Anti-Friction Shields

This element of the EASYTileAlign system is optional and recommend for polished surfaces such as Porcelain Paving or Sawn Natural Stone. These shields stop the tile surfaces from being scratched by the Levelling Caps. Simply place a shield onto your Spacer Posts before screwing the Levelling Caps on.

These come as a pack of 100 and can also be reused. Click here to buy.

For best results, purchase Levelling Caps and Anti-Friction Shields.

Benefits of EASYTileAlign

• Great value in price
• Pack of 150 Spacers some in a handy re-sealable bag
• Ultra precision in joints achieved
• Completely level surfaces in seconds
• Made in the UK
• Suitable for all Paving materials

How to us EASYTileAlign

1. Once you've laid two Paving slabs adjacent to eachother on your Mortar bed, slide a Spacer Post at the edge of the Paving slabs, you may need more than one per Paving slab side, depending on tile size. 
2. Bed the Paving slab into the adhesive mortar bed, sliding back and forth and using a rubber mallet to release any trapped air.
3. Spin the Levelling Cap (sold separately) onto the Spacer Post until tight. This is what will level your pavers. If you are installing Paving with a polished surface, such as Porcelain Paving, use the Anti-Friction Shields (also sold separately) to prevent scratching of the surface.
4. Once the mortar bed has fully dried, unspin the Levelling Caps and snap off the Spacer Posts in the direction of the joints. The Shields and the Levelling Caps can be reused.