Why Choose Azpects EasyJoint Select?

Easy to Use:
Azpects EasyJoint Select really stands out from the rest of the jointing compounds on the market as it is ready to use on your paving joints and simply requires pouring out and water being added to it to create the perfect slurry. 

All-Weather Jointing Compound:
One of the best selling points of EasyJoint Select is that it can be used in a range of weather conditions; including dry, hot weather as well as heavy rain - in fact, with EasyJoint Select, the wetter the weather, the better!

Reusable once opened:
If you have some of this jointing compound left and don't want to waste any by throwing it away, you can actually store it for future use! Simply submerge the leftovers in 50mm of water and store it somewhere dry for up to 12 months.

Hardwearing:
If you're looking for a commercial-grade jointing compound that will stand the test of time, EasyJoint Select is a great option. This Grout is weather-proof, weed-resistant, stain-resistant and very durable for heavy foot traffic. 

3mm or Wider Joints:
Please be aware that the paving joints must be a minimum of 3mm wide and 20mm deep for this to work properly.

Driveways:
Also please remember that the EASY Joint Select is not suitable for driveways.

How to use Azpects EasyJoint Select

There are 2 ways in which you can apply jointing to your paving, and we would recommend you work with someone else to complete this.

Method 1: Wet Application Method (recommended)

• This method involves emptying half the contents of the bag over the area that needs jointing. Using a soft brush or a squeegee, sweep the jointing compound into the joints generously, ensuring that all gaps are filled properly.
• Secure the compound into the joints with water using your hosepipe in a gentle spray setting – this ensures the grout is compact into the jointing, further ensuring that all the gaps are filled.
• Once you've completed this across the entire area, spray it a final time and then leave it to allow the paving to dry out. To smoothen it out you can use a jointing iron or trowel to ‘point’ the jointing.
• Check this area after a few hours to see if there are any bits that have been missed and need topping up, and then leave it to completely dry out and 'cure'.

 Method 2: Dry Application Method (For use when applying in temperatures at or below freezing)

• DO NOT WET THE SURFACE. The freezing temperatures may cause ice to form that may prevent the jointing from settling.
• To prevent marking, the paving should be sealed, preferably before installation. This will ensure that both the edges and the paving are protected.
• Sprinkle half the bag of jointing material over the desired area and use a soft brush to push the product into the joints – you must compact the material using a pointing iron to make sure the gaps are filled properly.

You only need to revisit the area for any re-doing if there has been extremely heavy rain straight after application, otherwise, you can safely let it cure on its own.